Saturday, April 9, 2011

GTP USB PIC Programmer

Here is my version of GTP-USB PIC Programmer using PIC18F4550


Since I can't find the original 18F2550 for this project, I decided to used its larger brother the 18F4550. With some hardware modification and a larger PCB of course.:P

Presenting RBT's GTP USB PIC Programmer.....


1st Edition:
PCB side..initial version

Components side



ZIP Socket PCB

ZIP Socket PCB



Drilling time



2nd Edition:

Complete USB PIC Programmer with ZIP socket










Download Project Here:



RBT


Posted by RBT-Techdepot at 12:57 AM
Labels:

18 comments:

  1. AnonymousMay 28, 2011 at 12:24 AM

    gumagana po ba ito?

    ReplyDelete
  2. RBT-TechdepotMay 28, 2011 at 11:25 AM

    malamang gumagana yan...:P

    ReplyDelete
  3. AnonymousMay 29, 2011 at 12:35 AM

    any pc?bsta may usb?

    ReplyDelete
  4. AnonymousMay 29, 2011 at 12:48 AM

    anong version po ng winpic ang ginamit nyo?

    ReplyDelete
  5. AnonymousMay 29, 2011 at 3:24 AM

    bakit po ganun?pag hardware test ok sya pero pag burn na ang error "NO Hardware Respond" napano po kaya ito? at chka pag install ng driver may warning na lumalabas.

    ReplyDelete
  6. RBT-TechdepotMay 29, 2011 at 8:07 AM

    I'm using Winpic800 ver. 3.55g.

    During driver installation lalabas talaga yung error like NOT SIGNED ang driver ignore mo lang and continue installation.

    What particular PIC ang ginamit mo??

    ReplyDelete
  7. AnonymousMay 29, 2011 at 10:11 AM

    yung i buburn?kng yun pic16f877a.bkit kya ganun ayaw nyang mag burn?hang 96% lang sya tpos mag EEROR "NO Hardware Respond":(

    ano po Email nyo?

    ReplyDelete
  8. RBT-TechdepotMay 29, 2011 at 9:32 PM

    Try mo read if ma read successfully..

    Here's my email:

    rbtabanaoATgmailDOTcom

    ReplyDelete
  9. AnonymousMay 30, 2011 at 8:03 PM

    ayaw din po nya sir :-(

    hindi po ba kailangan ng extra supply?

    ReplyDelete
  10. AnonymousJune 3, 2011 at 12:36 PM

    SIR ANY COMMENT?

    ReplyDelete
  11. RBT-TechdepotJune 3, 2011 at 4:57 PM

    Sakin wala naman external supply..check mo yung ZIP mo or better try to program vi ICSP..

    ReplyDelete
  12. AnonymousJune 6, 2011 at 2:20 AM

    sir bakit sa mga EMAXX na mobo at msi ayaw nya?pero sa asus na luma pede? namimili ba ng pc ito?

    ReplyDelete
  13. RBT-TechdepotJune 6, 2011 at 11:49 AM

    I don't know..sa laptop ko lang ginagamit to..

    ReplyDelete
  14. AnonymousJune 6, 2011 at 9:47 PM

    ano po brand ng laptop nyo?

    ReplyDelete
  15. AnonymousJuly 22, 2011 at 3:49 PM

    mukhang compaq yun nakita ko sa isang post ni sir kasam...

    ReplyDelete
  16. RBT-TechdepotJuly 22, 2011 at 7:03 PM

    Compaq, Acer at Dell working sya..

    ReplyDelete
  17. AnonymousOctober 2, 2011 at 12:25 AM

    RONNIE MERON KA BA EXPERIENCE SA WILLEM EPROM PROGRAMMER

    ReplyDelete
  18. RBT-TechdepotOctober 2, 2011 at 9:09 AM

    Yeah..the old one yung LPT pa with lot of jumpers and DIP switch...:)

    nasa basurahan ko yun....:P

    ReplyDelete

Subscribe to: Post Comments (Atom)